Προϊόντα
Noctua NH-U14S TR5-SP6 CPU Cooler
Χωρίς ΦΠΑ: 104,76 €
Πληροφορίες
Δόσεις
Buy Now - Pay Later
Notes and warnings
Please note that the NH-U14S TR5-SP6 is a dedicated version for AMD TR5/SP6 sockets (sTRX5/sWRX9). Due to its customised larger base, it cannot be used on smaller sockets and is incompatible with Noctua’s mounting kits for these sockets
| Cooler Specifications |
Socket compatibility: AMD sTRX5, sWRX9, SP6 |
| Fan Specifications | Model: 2x Noctua NF-A15 HS-PWM Max. rotational speed (+/- 10%): 1500 RPM Max. airflow: 40,2 m³/h Max. acoustical noise: 24,6 dB(A) Connector: 4-pin PWM Bearing: SSO2 Input power (typical): 1.056 W Max. input power / Voltage range: 1.56 W / 12 V MTTF: > 150.000 h |
Noctua NH-U14S TR5-SP6
Maximum Performance and superb acoustics for AMD Threadripper (sTRX5/sWRX9) and EPYC 8004 (SP6)
The NH-U14S TR5-SP6 is a 140mm size premium quality quiet CPU cooler for workstations and servers based on AMD Threadripper and Epyc processors that utilise TR5/SP6 sockets (sTRX5/sWRX9). Built on the proven basis of the renowned TR4-SP3 model with its large heatsink and full-cover contact surface, the TR5-SP6 revision employs two of Noctua’s award-winning, PWM controlled NF-A15 140mm fans in order to achieve maximum performance and superb acoustics. Topped off with the pre-applied NT-H2 thermal compound as well as the professional SecuFirm2™ mounting system for TR5/SP6 that has been updated to meet the platform’s increased pressure specifications, the NH-U14S TR5-SP6 forms a complete premium quality package for quietly cooling TR5-based Threadripper workstations and SP6-based Epyc servers.
Proven heatsinks for AMD Threadripper & Epyc
First introduced in 2017, Noctua’s Threadripper and Epyc coolers have become a standard choice when it comes to quiet, premium grade air cooling solutions for AMD-based workstations and servers. Thanks to their superior acoustic efficiency, they are ideal for Threadripper and Epyc systems that run in noise sensitive environments (e.g. audio/video production, content creation, engineering, etc.).
Enlarged contact surface
At 70x56mm, the heatsink’s copper contact surface is more than double the size of the standard desktop model. Tailored to fit the enormous integrated heat-spreaders (IHS) of AMD’s TR5/SP6 based processors, this customised design allows for an optimal heat flow from the CPU over the base to the heatpipes and on to the cooling fins.
140mm size for maximum performance
With six heatpipes, a fin surface area of more than 6000cm² and two highly optimised NF-A15 140mm fans, the NH-U14S TR5-SP6 provides a superior level of quiet cooling efficiency. This makes it ideal for building cutting-edge, ultra high-performance Threadripper-based workstations that run almost silent.
SecuFirm2™ mounting for TR5-SP6
The NH-U14S TR5-SP6 combines the proven basis of the TR4-SP3 model with new mounting brackets that meet the increased pressure requirements of AMD’s TR5/SP6 socket (sTRX5/sWRX9). Installation is just as easy as before: Put on the heatsink, fix the four spring-loaded Allen key screws using the supplied tool and you’re done!
Offset mounting options
The SecuFirm2™ mounting for TR5/SP6 makes it possible to offset the cooler by 3 or 6mm. On motherboards with east-to-west socket orientation, this can be used to offset the cooler(s) towards the right, increasing clearance towards the I/O panel. On boards that use a north-to-south orientation of the CPU socket(s), this allows offsetting the cooler towards the upper edge of the motherboard in order to increase PCIe clearance.
| Κατασκευαστής | Noctua |
| Μοντέλο | NH-U14S TR5-SP6 CPU Cooler |
| Κατηγορία | Ψύξη Επεξεργαστών |
| Socket | sTR5 sWRX9 |
| Τύπος Ψύξης | Αερόψυξη |
| Λοιπά στοιχεία | Please note that the NH-U14S TR5-SP6 is a dedicated version for AMD TR5/SP6 sockets (sTRX5/sWRX9). Due to its customised larger base, it cannot be used on smaller sockets and is incompatible with Noctua’s mounting kits for these sockets. |
| Εγγύηση | 6 Έτη |