HPE OfficeConnect OC20 2x2 Dual Radio 802.11ac Access Point with PoE

I/O ports and slots

• One 10/ 100/ 1000BASE-T Ethernet network interface (RJ-45)
- Auto-sensing link speed and MDI/MDX
- 802.3az Energy Efficient Ethernet (EEE)
• Visual indicators (multi-color LEDs): for System and Radio status
• Reset button: factory reset (during device power up)
• Kensington security slot

Wi-Fi Radio Specifications

• Indoor, dual radio, 5GHz 802.11ac 2x2 MIMO and 2.4GHz 802.11n 2x2 MIMO
• Connectivity standard IEEE 802.11 a/ b/ g/ n/ ac
• Support for up to 100 associated client devices per radio
• Supported frequency bands ( country-specific restrictions apply)
- 2.400 to 2.4835GHz
- 5.150 to 5.250GHz
- 5.250 to 5.350GHz
- 5.470 to 5.725GHz
- 5.725 to 5.850GHz
• Available channels: Dependent on configured regulatory domain
• Short guard interval for 20MHz, 40MHz and 80MHz channels
• Space-time block coding (STBC) for increased range and improved reception
• Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
• Transmit beam-forming (TxBF) for increased signal reliability and range
• Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 300 (MCS0 to MCS15)
- 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80

Wi-Fi Antennas

Two integrated dual-band downtilt omni-directional antennas for 2x2 MIMO with maximum antenna gain of 3.4dBi in 2.4GHz and 6.6dBi in 5GHz.

Physical characteristics

Dimensions 5.9 x 5.9 x 1.6 in
Weight 0.8 lbs (380 g)

Power sources and consumption

The AP supports direct DC power and Power over Ethernet (PoE)

• When both power sources are available, DC power takes priority over PoE

• Power sources are sold separately

• Direct DC source: 12Vdc nominal, +/- 5%

• Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af/ 802.3at compliant source

• Maximum (worst-case) power consumption: 12.3W (PoE) or 10.1W (DC)

• Maximum (worst-case) power consumption in idle mode: 5.3W (PoE) or 4.4W (DC)

Mounting

The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16-inch flat T-bar drop- tile ceiling. Several optional mount kits are available to attach the AP to a variety of surfaces.