Προϊόντα
Zyxel 802.11ac Dual Radio Dual-optimized Antenna 3x3 Wireless Access Point
![Zyxel 802.11ac Dual Radio Dual-optimized Antenna 3x3 Wireless Access Point [WAC6103D-I] Εικόνα 1](https://static.msystems.gr/photos/big_photos/22979.jpg)
Χωρίς ΦΠΑ: - €
Πληροφορίες
Δόσεις
Άτοκες Δόσεις
Δόσεις χωρίς πιστωτική
Buy Now - Pay Later
| RF Specifications |
Support data rate 802.11a/ g:6, 9, 12, 18, 24, 36, 48 and 54 Mbps 802.11b: 1,2,5.5 and 11Mbps 802.11n: up to 450 Mbps in MCS23(40 MHz) 802.11n/ac premium features 3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams Maximal Ratio Combining (MRC) 20-, 40- and 80-MHz channels Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) Cyclic Delay diversity (CSD) support Maximum Likelihood Demodulation (MLD) support Low Density Parity Check (LDPC) support Antenna Dual-optimized internal antenna Ceiling: 2.4 GHz 3 dBi; 5 GHz 4 dBi Wall: 2.4 GHz 4 dBi; 5 GHz 5 dBi Receive sensitivity Min. Rx sensitivity up to -102 dBm |
| WLAN |
WLAN maximum throughput Up to 900 Mbps Security and privacy Supported WEP, WPA/ WPA2-Enterprise, WMM (Wi-Fi certified) ,multiple EAP types, IEEE802.1X, MAC filtering, Layer-2 isolation , RADIUS authentication and more encryption supported when working with ZyXEL NXC controller series Network Support IPv6 VLANs DHCP Client QoS WMM WMM power save DiffServ marking |
| Management |
ZON utility Discovery of ZyXEL switches, APs and gateways in local area network Centralized and batch configurations IP configuration IP renew Device factory reset Device reboot Device locating Web GUI access Firmware upgrad Password configuration One-click quick association with ZyXEL AP Configurator (ZAC) Smart connect Discover neighboring devices One-click remote management access to the neighboring ZyXEL devices ZyXEL AP configurator *1 Batch AP configuration Batch AP firmware upgrade Batch AP profile backup *1: Features supported on Standalone AP mode ZyXEL Wireless Optimizer Wi-Fi AP planning Wi-Fi coverage detection Wireless health management |
| Physical Interfaces |
Interfaces 2 gigabit port 1 4-Pin serial console port Support 802.3at PoE for full functional operation Input power 802.3at PoE only |
| Standard Compliance |
Ethernet IEEE 802.3 IEEE 802.3u IEEE 802.11ab IEEE 802.3au IEEE 802.3az IEEE 802.3at PoE IEEE 802.3at WLAN 802.11b: DBPSK, DQPSK, CCK 802.11g: BPSK, QPSK, 16-QAM, 64-QAM 802.11a: BPSK, QPSK, 16-QAM, 64-QAM 802.11n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM |
| Certifications |
Radio FCC part 15C FCC part 15E ETSI EN 300 328 EN 301 893 LP0002 EMC FCC part 15B EN 301 489-1 EN 301 489-17 EN55022,EN55024 EN61000-3-2/-3 EN60601-1-2 BSMI CNS13438 Safety EN 60950-1 IEC 60950-1 BSMI CNS14336-1 |
| Physical Specifications |
Dimensions 203.9 x 191.7 x 34.7 mm / 8.03 x 7.55 x 1.37in. (WxDxH) Weight 445g / 0.98lb |
Enterprise-class 11ac with dual-optimized antenna
The WAC6103D-I is a high-performance 802.11ac three-stream access point offering combined data transfer rates up to 1.75Gbps with a dual-optimized antenna. The adjustable antenna provides superior performance in both ceiling- and wall-mounted deployments. User-friendly features allow for adjustment of antenna patterns via either physical switch or GUI in just seconds. No prior professional knowledge of antenna accessory selection or signal coverage fine-tuning is necessary.
Ultra-slim design blends with modern interiors
The WAC6103D-I expresses stylish functionality through its optimized radiating platform, delivering exceptional performance in only 1.26 inches height (32mm). The WAC6103D-I perfectly blends into any modern office, hotel, classroom, or café.
Perfect choice of medium to high-density environments
Designed with dual-optimized antenna, the WAC6103D-I provides switchable signal patterns to reduce inter-floor interference. In addition, advanced Wi-Fi features such as load balancing and smart-client steering ensure a smooth, consistent, and uninterrupted wireless access experience for all users.
Easy to deploy in multiple AP environments
WAC6103D-I is extraordinarily easy to install with the Zyxel APFlex™ feature. While deploying large groups of WAC6103D-I with AP controllers in place, APFlex™ enables streamline and hassle-free installation, simple switching between Managed/Standalone AP modes and automatic integration of APs into the network environment. When operating, DCS (dynamic channel selection) balances the AP channels to reduce signal interference.
| Κατασκευαστής | Zyxel |
| Μοντέλο | 802.11ac Dual Radio Dual-optimized Antenna 3x3 Wireless Access Point |
| Part Number | WAC6103D-I |
| Κατηγορία | Access Points |
| Ταχύτητα WiFi | AC900 |
| Θύρες Ethernet | 2x 1 Gbps |
| Υποστήριξη PoE | Με PoE |
| Εγγύηση | 2 Έτη |