|Κωδικός Msystems: 001-49636|
Χωρίς ΦΠΑ: 58,79 € 58.79
Since the Freezer 50 is built for maximum performance, including a massive heatsink, it does not have limitless RAM Clearance. Recommended is a maximum memory module height of 37.5 mm. This stipulation is mainly due to the tip on the underside of the Freezer 50, which means modules that exceed this height could still be compatible if they have V-shaped or centrally recessed heatsinks.
The 13 A-RGB LEDs installed in the Freezer 50 are autonomously controllable. The Freezer 50 is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB mainboard connection or via an external controller and synchronized with the lighting of other hardware.
The massive, asymmetrical twin-tower CPU cooler offers more cooling surface and, together with its six U-shaped Direct-Touch Heatpipes, ensures better heat distribution and faster heat dissipation.
This enables the highest possible cooling performance and makes the Freezer 50 to one of the strongest air cooler ARCTIC ever made.
The Freezer 50 features two P-fans working in push-pull-configuration. Combining a 120 mm and a 140 mm fan leads to an increase in airflow for improved cooling, while keeping the noise level and the installation height down.
The Freezer 50 benefits of all advantages of our P-fans:
* High static pressure for increased cooling performance
* Broad RPM range
* Lower power consumption
* Less vibrations
* Extended life span
* High quality bearing
* PWM for synchronous fan control
ARCTIC's own A-RGB Controller lets you enjoy exciting RGB lighting, even if your motherboard has no A-RGB connector.
The controller can be freely placed in the case and with the included remote control you then have full control over the effect and colour design.
|Μοντέλο||Freezer 50 Dual Tower Addressable RGB CPU Cooler + Controller|
|Λοιπά στοιχεία||Ram Clearance: 37.5 mm|
Heat Pipes: Direct Touch, Ø 6 mm x 6
Fin Material: Aluminum
Number of Fins: 2 x 52
Fin Thickness: 0.4 mm
Thermal Paste: ARCTIC MX-4 included
Fan Size: 1 x 120 mm, 1 x 140 mm
Fan Speed: 120 mm: 200 – 1800 rpm || 140 mm: 200 – 1700 rpm
Fan Bearing: Hydro Dynamic Bearing
Noise Level: 0.4 Sone @ max. rpm
Current: 120 mm: 0.09 A/ 12 V || 140 mm: 0.13 A/ 12 V
LEDs: 13 A-RGB LEDs
Connector: 3-Pin 5V-DI-GND Connector
Current: 0.5 A / 5 V
Lenght: 148 mm
Width: 149.5 mm
Height: 166 mm