Perfect for connecting serial modems, PDAs, digital cameras, printers, ISDN terminal adapters and many more. 2x DSUB 9, serial ports, male. Chipset: MCS9865, Data transfer rate up to 115,2Kbps, Plug and play, I/O adress and IRQ assigned by BIOS, for Windows 7/Vista/XP.
This riser card allows you to connect your PCI Express x4 card to the PCI Express slot of your motherboard in an 90° angle. This type of horizontal installation is necessary inside 1U computer cases, where a vertical installation is not possible due to space limitation.
Supports Standard Parallel Port (SPP), Bi-directional Parallel Port (BPP), Enhanced, Parallel (EPP) & Enhanced Capability Port (ECP), 1x or 2x DB25 parallel port(s), Chipset : SUN1888, Compatible with IEEE1284 standard, Universal PCI interface 3.3V & 5V, 32/64bit, Re-map to ISA Address 278, 378
Supports Standard Parallel Port (SPP), Enhanced Parallel (EPP) & Enhanced, Compliant with PCI Local Bus Specification, Revision 2.3, 32bit bus, Capability Port (ECP), 2x DB9 serial ports, UART16C450/550, 1x DB25 parallel port, Chipset : MCS9865, Automatically selects IRQ & I/O address
Perfect for connecting any parallel or serial device including printers, scanners and ISDN terminal adapters, 2x DB9 Serial ports, 1x DB25 Parallel port, Chipset: MCS9901CV-AA, Compliant with PCI Express, Base Specification 1.0a
Perfect for connecting serial modems, PDAs, digital cameras, printers, ISDN terminal adapters and many more, 2x DSUB 9, serial ports, male, UART 16C950, Chipset: OXPCIe952, Data transfer rate up to 230.400bps, Compliant with PCI Express base specification 1.1
Data transfer rate up to 2.5Mbps, 1x DB25 female connector, Add one IEEE1284 Parallel port on system, Supports Standard Parallel Port (SPP),Enhanced Parallel Port (EPP) and Enhanced Capability Port (ECP), Compliant with PCI Power Management 1.2 , Compliant with PCI Express Base spec 1.1
This PCI Express card by Delock expands the PC by one M.2 slot. One M.2 module in 2280, 2260, 2242 or 2230 format can be connected. When connecting a SATA module, the SATA 7 pin port must be connected to the motherboard.