|Κωδικός Msystems: 001-50669|
Χωρίς ΦΠΑ: 45,89 € 45.89
The MWE Bronze offers a simple, reliable way to power your mid-range system safely and efficiently. The 80 PLUS Bronze efficiency rating, DC-to-DC circuit design, discrete cables, silent mode, and 120mm HDB fan offer a power supply unit that's solid in features and performance while remaining simple. This PSU will handle all your core computing needs with none of the hassles or challenges of additional specialty features, software synchronization, or other bells and whistles. Just plug the cables you need into your components and get to work. For a great computing experience, you can’t go wrong with the MWE Bronze.
The efficiency of your power supply unit is important because it directly affects you system’s performance and your power bill. The efficiency rating does not reflect the quality or reliability of a PSU. It only reflects the unit’s ability to move power from the wall to your components. The higher a PSU’s efficiency is, the lower the total amount of power it needs to power your system. The MWE Bronze series has an 80 PLUS Bronze efficiency rating, meaning it has a guaranteed typical efficiency of 85%.
Power comes in multiple voltage levels. The wall delivers power in one voltage level but your components each need a specific voltage to operate properly. The process of converting raw power from the wall to the multiple voltage levels your parts need requires special components to complete this process quickly, efficiently, and safely. The MWE Bronze’s DC-to-DC + LLC technology was painstakingly crafted to accomplish this goal. The Dual Forward circuit layout has been designed to convert 12V power to 3V and 5V levels with minimal ripple noise, 80 PLUS Bronze efficiency, and reduced risk to your connected hardware.
ACTIVE POWER FACTOR CORRECTION
The many processes required by a power supply unit in order to take power directly from the wall or other fixed power source, convert it to the correct output required by the connected components, and then distribute that power to said components safely can be full of risks. This is why it’s important for a PSU to have the right protections and regulations to ensure this process runs correctly.
The constant struggle between cooling and noise is as old as the consumer PC industry itself. Keeping your components cool without having to hear about it while you work is still one of the greatest challenges for all fan based cooling technologies. The MWE Bronze tackles this problem with a 120mm HDB fan. The hydro dynamic fan bearing creates less friction, making it great for low RPM operations. This technology keeps the fan running smoothly and efficiently for longer, keeping the noise level down and extending the lifespan of the PSU.
|Μοντέλο||MWE 600W V2 Bronze Rated Power Supply - Bulk|
|Εύρος Ισχύος||600 - 699 Watt|
|Efficiency||80 Plus Bronze|
|Συνδέσεις Τροφοδοσίας||1x 24-pin ATX |
2x 8-pin EPS (1x 8pin,1x 4+4pin)
4x 4-pin Molex
2x PCIe (6+2pin)
|Λοιπά στοιχεία||ATX VERSION: ATX 12V V2.52|
PFC: Active PFC
INPUT VOLTAGE: 100-240V
INPUT CURRENT: 10-5A
INPUT FREQUENCY: 50-60Hz
DIMENSIONS (L X W X H): 140 x 150 x 86 mm
FAN BEARING: HDB
FAN SPEED: 2400 RPM
NOISE LEVEL @ 20%: 11.65 dBA
NOISE LEVEL @ 50%: 13.9 dBA
NOISE LEVEL @ 100%: 34.9 dBA
EFFICIENCY: 85% Typically
ERP 2014 LOT 3: Yes
OPERATING TEMPERATURE: 40°C
POWER GOOD SIGNAL: 100 - 500 ms
HOLD UP TIME: >18ms at 100% Full Load@230Vac
MTBF: >100,000 Hours
PROTECTIONS: OVP, OPP, SCP, UVP, OTP
REGULATORY: CCC, CE, TUV-RH, RCM, EAC, cTUVus, FCC, BSMI, KC, CB
WATTAGE: 500 to 750W
SERIES: MWE Bronze Series