APC Power-Saving Back-UPS 8 Outlet + USB Type-A Charger 650VA/400W 230V

Output power capacity: 400Watts / 650VA

Output Connections

(2) Schuko CEE 7 (Surge Protection)

(6) Schuko CEE 7 (Battery Backup)

Nominal Output Voltage: 230V

Nominal Input Voltage: 230V

Input Connections: Schuko CEE 7/7P

Cord Length: 1.83meters

Maximum Input Current: 6.0A

Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.

Cold-start capable: Provides temporary battery power when the utility power is out.

Dataline surge protection: Provides protection of connected equipment from power surges on the data lines.

Disconnected battery notification: Warns when a battery is not available to provide backup power.

Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Simple battery replacement: Increases UPS availability by allowing quick, easy battery replacement.

USB connection: Use your PC to access additional power protection and management features for your UPS via a USB Port.

User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Output

Max Configurable Power (Watts): 400Watts / 650VA

Efficiency at Full Load: 80.0 %

Output Frequency (sync to mains): 47 - 63 Hz

Output Frequency (not synced): 50/60 Hz +/-1 Hz

Other Output Voltages: 220

Topology: Standby

Waveform type: Stepped approximation to a sinewave

Transfer Time: 6ms typical : 10ms maximum

Input frequency: 47 - 63 Hz

Input voltage range for main operations: 180 - 266V

Efficiency at Full Load: 80.0 %

Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Expected Battery Life (years): 2 - 5

Battery Volt-Amp-Hour Capacity: 75

Replacement Battery Kit: APCRBC110

Easy-to-use, safe system shutdown software with power and energy management features for home computers and battery backups

Interface Port(s): USB

Control panel

LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators, LED status display with On Line : On Battery : Replace Battery and Overload indicators

Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge energy rating: 310Joules

Data Line Protection: Analog phone line for phone/fax/modem/DSL (RJ-45 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector)